Hello there,
Yesterday I have tried to update BOINC on my Raspberry Pi, but it hadn't started and so I had to reinstall it. After it I got at R@h a new Host-ID. But I can't set the location on the map now

Three WUs are ready, but for half the credits.

http://radioactiveathome.org/boinc/show_host_detail.php?hostid=12452
____________

please delete

please delete.

please delete

I lost my connections to the project a while ago, because I had used a fixed IP in my host file, about wich I forgot. Therefore I could not even reach this pages her for help.

Last week I got a reminder from a co-cruncher about this, and a hint about the host file as well, so I restarted the project. The machine is running again, but I only get half the credits, because I can't set a location for my detector, there simply is no map in the host page.

How can this be sorted out?
____________
Gruesse vom Saenger

If some admin is reading this and can do something about it:
This are my coordinates:
53.06186,8.811007 Dez.-Grad
N53 03.712 E008 48.660 Grad Min.
N53° 03' 42.696" E008° 48' 39.625" Grad Mn Sk
32U E 487335 N 5879169 UTM
32UMD E 87335 N 79169 MGRS
X 980837 Y 6994449 Merc. WGS
X 979739 Y 6986622 Merc. Falk
X HQ0SQ Y RT98C NAC
R 3487401 H 5881081 GK
JO43JB74HU QTH
u1qmb7xg GeoHash
9F5C3R66+PCR OLC / Plus
____________
Gruesse vom Saenger

Hi,
Got an eMail, my sensor has no location (anymore). And really, can't find the map anymore to (re)set location. Somebody has the link to where it's moved?
Thank you

Hi,
Got an eMail, my sensor has no location (anymore). And really, can't find the map anymore to (re)set location. Somebody has the link to where it's moved?
Thank you

Could it be possible to just write the coordinates somewhere instead of an interactive map?
____________
Gruesse vom Saenger

I've just got the second mail with a reminder:

Hello,

Your sensor connected to host 19613 has no location set.
Please go to your host page at http://radioactiveathome.org/boinc/show_host_detail.php?hostid=19613
and add a marker on the map
You don't have to set precise location, ± couple of hundreds of meters is fine.
Hosts with no location are granted only half of the credits.


This is an automated message from Radioactive@Home server.
If you have any questions, please visit our forums at http://radioactiveathome.org/boinc/forum_index.php

I've just got the second mail with a reminder:

Hello,

Your sensor connected to host 19613 has no location set.
Please go to your host page at http://radioactiveathome.org/boinc/show_host_detail.php?hostid=19613
and add a marker on the map
You don't have to set precise location, ± couple of hundreds of meters is fine.
Hosts with no location are granted only half of the credits.


This is an automated message from Radioactive@Home server.
If you have any questions, please visit our forums at http://radioactiveathome.org/boinc/forum_index.php

I just got the third mail of this spam, and still nothing has been done at all by the project.
I really feel a wee bit neglected, as you still spam me with this mails, that I can't do anything about, because you simply don't allow me to do anyrging about.
Stop this spam asap, or do your fucking job and let me put the coordinates somehow somewhere!

I've just got the second mail with a reminder:

Hello,

Your sensor connected to host 19613 has no location set.
Please go to your host page at http://radioactiveathome.org/boinc/show_host_detail.php?hostid=19613
and add a marker on the map
You don't have to set precise location, ± couple of hundreds of meters is fine.
Hosts with no location are granted only half of the credits.


This is an automated message from Radioactive@Home server.
If you have any questions, please visit our forums at http://radioactiveathome.org/boinc/forum_index.php

But still nothing changed, I cannot put my location anywhere but here.

Double post, sorry, but you spammed me as well.
____________
Gruesse vom Saenger

And the next spam has just arrived.
WTF are you doing? If you can't repair the location settings, at least stop this annoying spam!

I just got the third mail of this spam, and still nothing has been done at all by the project.
I really feel a wee bit neglected, as you still spam me with this mails, that I can't do anything about, because you simply don't allow me to do anyrging about.
Stop this spam asap, or do your fucking job and let me put the coordinates somehow somewhere!

I've just got the second mail with a reminder:

Hello,

Your sensor connected to host 19613 has no location set.
Please go to your host page at http://radioactiveathome.org/boinc/show_host_detail.php?hostid=19613
and add a marker on the map
You don't have to set precise location, ± couple of hundreds of meters is fine.
Hosts with no location are granted only half of the credits.


This is an automated message from Radioactive@Home server.
If you have any questions, please visit our forums at http://radioactiveathome.org/boinc/forum_index.php

But still nothing changed, I cannot put my location anywhere but here.

I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more?
____________
Lebe Dein Leben so wie Du wenn Du stirbst wünschen wirst gelebt zu haben

I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more?

I keep on getting this eMails too, since I had to put the sensor on a new PC. Seems like nobody from the site is reading this any more?

See here in their main forum, they don't care.

Clearly, no map, no location possible.
From what I understand, Google no longer accepts that the project uses the developer version of its map.
There are free maps that could be used for the radioactive project, but we are back to the same problem, someone would have to code to integrate a new map.
____________

Clearly, no map, no location possible.
From what I understand, Google no longer accepts that the project uses the developer version of its map.
There are free maps that could be used for the radioactive project, but we are back to the same problem, someone would have to code to integrate a new map.

At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :(

Sorry, double post, my fault.

At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :(

Yes, but at least the coordinates should be possible to insert

Yes, but at least the coordinates should be possible to insert

I have four fields, the first two empty. What am I supposed to give in as data?

• 53.06194417,8.81121925 Dez.-Grad
  
• N53 03.717 E008 48.673 Grad Min.
  
• N53° 03' 42.999" E008° 48' 40.389" Grad Mn Sk
  
• 32U E 487349 N 5879178 UTM
  
• 32UMD E 87349 N 79178 MGRS
  
• X 980860 Y 6994464 Merc. WGS
  
• X 979763 Y 6986637 Merc. Falk
  
• X HQ0T7 Y RT98Q NAC
  
• R 3487416 H 5881091 GK
  
• JO43JB74IU QTH
  
• u1qmbe8h GeoHash
  
• 9F5C3R66+QFH OLC / Plus
  

But unfortunately it's impossible.
____________
Gruesse vom Saenger

Hello Saenger,

For me the 3rd is 19090 and the 4th is 15201
the 3rd is my user Id within the project, the 4th is the Id of my sensor.

but as you state it is impossible to enter values in the first two fields.
____________

At least you have a graph and getting half credits. My sensor is lit up and working fine, but I can no longer run tasks for this project as it says there is no app which will run on my Linux box (it's lying, there is, I haven't changed the computer just upgraded to a newer version of Linux). So I have a pretty USB geiger counter and that's it. Nobody else can see it but me. It's a pity, this was a fun project while it had support, but I feel nobody has the technical knowledge to answer/fix these problems now. :(

Hello, I would like to add my 39252 sensor to the map, but I still can't. How should I proceed correctly? Thank you

double again, sorry
____________
Gruesse vom Saenger

Hello, I would like to add my 39252 sensor to the map, but I still can't. How should I proceed correctly? Thank you

Can't set my location (in the Netherlands).
Not a single sensor in the Netherlands anymore, coincidence?
____________

Does the manual method not work?

http://radioactiveathome.org/boinc/forum_thread.php?id=499&nowrap=true#4046


____________

Does the manual method not work?

http://radioactiveathome.org/boinc/forum_thread.php?id=499&nowrap=true#4046

Does the manual method not work?

http://radioactiveathome.org/boinc/forum_thread.php?id=499&nowrap=true#4046

(Warning: Issues discussed here (today april,14 2022) may already be solved if s.o. reads some hours later!)
I'm not sure, but i think that the "add sensor" function has mixed up longitude and latitude - or was that me? Maybe you can add some help:

Latitude: ##.##### degrees north (of the equator) - Longitude: ##.##### degrees east (of greenwich)

Well, the "add sensor!" button is working, but can you tell us about the delay between entering coordinates and the spot on map changing position please

In the end I solved it by attaching my sensor to another (Windows) system and even managed -don't ask me with which version of tried settings- to add my sensor on the map.

Latitude: ##.##### degrees North (of the Equator) - Longitude: ##.##### degrees East (of Greenwich)

Does the manual method not work?

http://radioactiveathome.org/boinc/forum_thread.php?id=499&nowrap=true#4046

No, it doesn't. I can insert what I want, it doesn't change anything. Neither under Windows/Chrome nor under Linux/FF.

Congratulations, Saenger
Note your hostId is just about as high as mine, after I changed system.


____________